Kyocera KM-F1050 User Manual

Default Setting (System Menu)
8-92 OPERATION GUIDE
Protocol Detail
The table below lists the network related function settings. The network related functions are available when
TCP/IP is On.
Item Description
Default
Setting
Restarting the
System*
NetBEUI Selects whether or not to receive
documents using NetBEUI.
On Y
LPD Select whether or not to receive
documents using LPD as the
network protocol.
On Y
SMTP
(E-mail TX)
Select whether or not to send e-
mail using SMTP.
Off N
POP3
(E-mail RX)
Select whether or not to receive e-
mail using POP3.
Off N
FTP Client
(Transmission)
Select whether or not to send
documents using FTP. When
selecting [On], set the FTP Port
Number. Use the FTP default port
21.
On
Port:21
Y
FTP Server
(Reception)
Select whether or not to receive
documents using FTP.
On Y
SMB Client
(Transmission)
Select whether or not to send
documents using SMB. When
selecting [On], set the SMB default
Port Number. Use the SMB default
port 139. For Windows Vista, use
445.
On
Port:139
N
i-FAX Select whether or not to use i-FAX. On N
LDAP Select whether or not to use LDAP. Off N
SNMP Select whether or not to
communicate using SNMP.
On Y
SNMPv3 Select whether or not to
communicate using SNMPv3.
Off Y
HTTP Select whether or not to
communicate using HTTP.
On Y
HTTPS Select whether or not to
communicate using HTTPS.
SSL must be set to [On] in SSL
Setup on page 8-96.
On Y

Kyocera KM-F1050 Specifications

General

Brand	Kyocera
Model	KM-F1050
Category	All in One Printer
Language	English