Lenze i510 Series Commissioning

2 Safety instrucons
2.1 Basic safety measures
Disregarding the following basic safety measures may lead to severe personal injury and dam-
age to material assets!
The product
•
must only be used as directed.
•
must never be commissioned if they display signs of damage.
•
must never be technically modied.
•
must never be commissioned if they are not fully mounted.
•
must never be operated without required covers.
Connect/disconnect all pluggable terminals only in deenergised condion.
Only remove the product from the installaon in the deenergised state.
Insulaon resistance tests between 24V control potenal and PE: According to EN 61800−5−1,
the maximum test voltage must not exceed 110 V DC.
Observe all specicaons of the corresponding documentaon supplied. This is the precondi-
on for safe and trouble-free operaon and for obtaining the product features specied.
The procedural notes and circuit details described in this document are only proposals. It is up
to the user to check whether they can be adapted to the parcular applicaons. Lenze does
not take any responsibility for the suitability of the procedures and circuit proposals descri-
bed.
The product must only be used by qualied personnel. IEC 60364 or CENELEC HD 384 dene
the skills of these persons:
•
They are familiar with installing, mounng, commissioning, and operang the product.
•
They have the corresponding qualicaons for their work.
•
They know and can apply all regulaons for the prevenon of accidents, direcves, and
laws applicable at the place of use.
Please observe the specic notes in the other chapters!
Notes used:
DANGER!
This note refers to an imminent danger which, if not avoided, may result in death or serious
injury.
WARNING!
This note refers to a danger which, if not avoided, may result in death or serious injury.
CAUTION!
This note refers to a danger which, if not avoided, may result in minor or moderate injury.
NOTICE
This note refers to a danger which, if not avoided, may result in damage to property.
Safety instrucons
Basic safety measures
12

Lenze i510 Series Specifications

General

Brand	Lenze
Model	i510 Series
Category	Inverter
Language	English