Omron NJ Series User Manual

8-13
8 CPU Unit Functions
NJ-series CPU Unit Software User’s Manual (W501)
8-3 SD Memory Card Operations
8
8-3-4 FTP Client Communications Instructions
FTP client communications instructions are used to transfer files via FTP from an NJ-series CPU Unit to
computers or Controllers at Ethernet nodes.
The files on the SD Memory Card are read and written when the following instructions are executed.
Version Information
A CPU Unit with unit version 1.08 or later and Sysmac Studio version 1.09 or higher are required
to use the FTP client communcations instructions.
You can read and write files on the SD Memory Card via EtherNet/IP by sending FTP commands to the
built-in EtherNet/IP port from an FTP client.
Refer to the NJ-series CPU Unit Built-in EtherNet/IP User’s Manual (Cat. No. W506) for details.
You can perform file operations from the Sysmac Studio for the SD Memory Card inserted in the CPU Unit.
In addition to Controller files, you can also store document files or other files on the SD Memory Card.
You can determine the remaining life of the SD Memory Card before the Card becomes physically dete-
riorated.
You can determine the remaining life of the SD Memory Card with the following functions.
• System-defined variable _Card1Deteriorated (SD Memory Card Life Warning Flag)
• SD Memory Card Life Exceeded (Observation) record in the event log
The life of the SD Memory Card is checked when the power is turned ON and periodically while the SD
Memory Card is inserted.
8-3-4 FTP Client Communications Instructions
Instruction name Instruction Description
Put File onto FTP Server FTPPutFile
The FTPPutFile instruction uploads one or more files in the FTP
client’s SD Memory Card to the FTP server.
Get File from FTP Server FTPGetFile
The FTPGetFile instruction downloads one or more files from the
FTP server to the FTP client's SD Memory Card.
8-3-5 FTP Server
8-3-6 File Operations from the Sysmac Studio
8-3-7 SD Memory Card Life Expiration Detection
File transfers
Built-in EtherNet/IP port: FTP server
SD Memory Card
FTP Client
CPU Unit
EtherNet/IP
FTP
commands

Omron NJ Series Specifications

General

Brand	Omron
Model	NJ Series
Category	Controller
Language	English