9 Backup Functions
9-52
NJ-series CPU Unit Software User’s Manual (W501)
This section describes the file name, creation timing, created directory, and verification results confir-
mation method for a CJ-series Unit verification results file.
Note However, if the SD Memory Card is write-protected, the verification results files will not be created.
The verification results files contain the results of comparing the Controller data and the data in a
backup file on the SD Memory Card in the CPU Unit for each data group. You can check the verification
results in the portion that gives the verification results for each CJ-series Unit. “Result=Matched” indi-
cates a data group for which no differences were found. “Result=Not matched” indicates a data group
for which differences were found. In the file shown below, CJ1W-CRM21 (MODE0) and CJ1W-EIP21
matched, and CJ1W-DRM21 and CJ1W-PRM21-DPV1 did not match.
9-11-8 Specifications of CJ-series Unit Verification Results File
File name
File File name
CJ-series Unit Verification Results File VerifyResult_CJUnit.log
File Creation Timing and Created Directories
Function Procedure Creation timing Created directory
SD Memory
Card backups
SD Memory Card Dialog Box
in Sysmac Studio
When verification is
executed
Same directory as backup file
System-defined variables When verification is
executed
Same directory as backup file
CPU Unit front-panel DIP
switch
When verification is
executed
Same directory as backup file
How to Check the Verification Results
To Next Page
Loading...
Need help?
General
