V04: SCENE FILE
Menu Image Item Description
<SCENE FILE> → V04 TOP
1 2 3 4 5 STORE
STANDARD
MEMORY STICK
READ (MS → CAM)
WRITE(CAM→ MS )
FILE ID:
CAM CODE
DATE
1 to 5，STORE
When STORE operation is not used:
Call the relevant scene file using the file number
selection menu.
After that, the indication of “STORE” is high-
lighted.
To cancel the call, select the file number again.
When STORE operation is used:
Place the cursor at “STORE” and turn the CAN-
CEL/ENTER lever to the ENTER side.
A message “STORE NO?” appears and the indi-
cation of "STORE" is highlighted. Save the rel-
evant scene file using the file number selection
menu.
STANDARD Calls the registered reference file.
READ (MS→CAM) Reads the scene file from the memory stick and
transfers it to the camera.
WRITE (CAM→MS) Acquires the scene file stored in the camera using
the file transfer, and writes it to the memory stick.
FILE ID Comment information of the reference file stored
in the memory stick. It can be edited from the
menu.
CAM CODE Model name information of the scene file stored
in the memory stick.
DATE Scene file save date information stored in the
memory stick.
V05: VIDEO LEVEL
Menu Image Item Settings
<VIDEO LEVEL> → V05 TOP
[R] [G] [B] [M]
WHITE : 0 0 0
BLACK : 0 0 0 0
FLARE : 0 0 0
GAMMA : 0 0 0 0
V MOD : 0 0 0 0
FLARE : ON
V MOD : ON D.SHAD: OFF
TEST : OFF
WHITE R/G/B ±99
BLACK R/G/B/M ±99
FLARE R/G/B ±99
GAMMA R/G/B/M ±99
V MOD R/G/B/M ±99
FLARE ON/OFF
V MOD ON/OFF
D.SHAD ON/OFF
TEST OFF/1/2
HDCU2500
3-30
To Next Page
Loading...
Need help?
General
