C02: BAR CHARACTER
Note
Menu numbers 11 and 12 are displayed by scrolling.
Menu Image Item Settings Description
<BAR CHARACTER> C02 TOP
↓ ↓
1
2
3
4
5
6
7
8
9
10
11
12
→<ALL CLEAR>
BAR CHAR-
ACTER
－ Sets strings 1 to 12 that are superimposed
on the color bar signal.
ALL CLEAR － Execute to clear all character strings. (Ex-
ecute via ENTER.)
Setting character string
Note
Use the CCU CONFIGURATION menu to check indication of data that is input on this page.
COLOR BAR (01) → BAR-CHARA: ON
The procedure to edit the first line is described below as an example.
1. Turn the control knob clockwise to set the cursor to line number 1 and turn the CANCEL/ENTER lever to ENTER.
The unit enters the edit mode and the software keyboard field is displayed.
Software keyboard
Editing data at the cursor
position
<BAR CHARACTER> C02 TOP
↓↓
1?
2
3
4
5
$
%&'()*+,-./0123456789:
;<=>?@ABCDEFGHIJKLMNOPQR
STUVWXYZ[¥]_
INS DEL RET ESC END
2. Turn the CANCEL/ENTER lever to ENTER.
The unit transitions to the character input mode and the cursor appears in the software keyboard field.
3. Set the cursor to the character you want to input with the control knob.
HDCU2500
3-17
To Next Page
Loading...
Need help?
General
