Pin No. Gain
14 13 12
H H H 60 dB
L H H 50 dB
H L H 40 dB
L L H 30 dB
H H L 20 dB
H: +5 V or open
L: GND
Input resistance: 100 kΩ +5 V pull-up
Adjusting MIC Phase
When the microphone signal phase is ahead of the video signal phase to be used, adjust the microphone signal phase
with AUDIO OUTPUT DELAY in MIC/AUDIO (C06) of the CCU CONFIGURATION menu.
0 ～ 3840 FS (Factory setting: 0 Fs)
Setting MIC Output Level
Set the MIC outputs (MIC1 and MIC2) with AUDIO OUT CH1 LEVEL/CH2 LEVEL in MIC/AUDIO (C06) of the
CCU CONFIGURATION menu according to each signal level.
–20 dBu, 0 dBu, or +4 dBu (Factory setting: 0 dB)
HDCU2500
2-10
To Next Page
Loading...
