To Next Page

To Previous Page

4-33

Improvement of print quality

Clean the surrounding area of nozzle surface

(1) Make the clean stick R, cleaning cup, gloves and cleaning solution, which come standard with the printer, available

for use.

 Use a new clean stick R when you start cleaning.

 Never touch the tip end of clean stick R with your hand. If any sebaceous matter is attached to the head nozzle, it may

result in the printer malfunction.

(2)

From the menu, select [Maintenance] > [Maintenance Part Clean/Replace], and press

 If any other error or message is displayed on the operation panel or warning message window, follow the message to solve

the problem, then perform the cleaning.

<TIPS>



Pressing

causes the platen to start moving. Do not put anything around the platen.

(3) Follow the on-screen message and turn off the power.

 Please complete the task within 30 minutes, in order to prevent the print heads from drying up.

 When the task will take more than 30 minutes to complete, close the front cover and turn on the power, then select

[Maintenance Part Clean/Replace] again to restart the task. Then, the head cleaning will be performed to prevent any ink

from drying up.

(4) Open the front cover.

X005

(5) Put a proper amount of cleaning solution into the cleaning cup.

Front cover

Brother GTX-4 Service Manual

Other manuals for Brother GTX-4