16
3.
Insert the platen in direction s and tighten the platen fixing
lever in direction d.
TIPS
Use with the knob (a) tightened when printing.
Perform this operation while the printer is in Standby mode.
1) -> [Language] -> Select your language ->
2) Press the power button to turn off the power.
Turn on the power of the printer and perform the operation
while the printer is in Standby mode.
1) -> [Maintenance] -> [Initial Ink Installation] -> [All
Print Heads]
TIPS
If you are using only color inks, perform the
following procedures.
-> [Maintenance] -> [White Ink Pause
Mode] -> [Enable]
Then follow the message and perform ink
installation.
2) Follow the precautions on the screen and press (It
takes about 50 minutes).
3) When the printer returns to Standby mode, the operation will
be completed.
Installing the ink
8
Configuring the language
7
X0188
â‘¡
â‘¢
(a)
To Next Page
Loading...
Need help?
General
