Brother GTX-4 Service Manual

5
Setup of the printer
Remove all the tapes, strings and sheets shown in the below
illustration.
Mount the supplied accessories according to the following
procedures.
Please note that the platen should be mounted after turning on
the power.
Rear cover
CAUTION
Be careful not to touch the claws of mounting portion on the
upper side of the rear cover. Otherwise you may be injured.

X0004
X0005
Removing the protection materials
1
X0014
Mounting the supplied accessories
2

Brother GTX-4 Specifications

General

Brand	Brother
Model	GTX-4
Category	Printer
Language	English