Cisco Firepower 4100 Command Reference

scope default-auth
To enter default authentication mode, use the scope default-auth command.
scope default-auth
Syntax Description
This command has no arguments or keywords.
Command Modes
Security mode
Authentication domain (/security/auth-domain)
Command History
ModificationRelease
Command added.1.4(1)
Usage Guidelines
Use the set commands in this mode to configure default authentication parameters such as authentication
service and session timeout values.
An authentication domain must be created prior to using this command to enter the default authentication
mode for a domain.
Example
This example shows how to enter security mode and then default authentication mode:
FP9300-A# scope security
FP9300-A /security # scope default-auth
FP9300-A /security/default-auth #
Related Commands
DescriptionCommand
Sets the default authentication service.set realm
Shows default authentication settings.show
Cisco Firepower 4100/9300 FXOS Command Reference
134
S Commands
scope default-auth

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English