Cisco Firepower 4100 Command Reference

show post
To display any errors that occurred during the most-recent BIOS power-on self-test (POST), use the show
post command.
show post [id|detail|expand|no-errors]
Syntax Description
(Optional) Show POST information for a specific server; valid values are 0 to
42949667295.
id
(Optional) Show additional POST details.detail
(Optional) Show all POST information.expand
(Optional) Show POST information without errors.no-errors
Command Modes
Any command mode; most relevant in server (/chassis/server) mode.
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this command in server mode.
Example
This example shows how to display POST information:
FP9300-A# scope server 1/1
FP9300-A /chassis/server # show post
POST:
Global ID Code Severity Affected Object Description
--------- -------- --------- ---------------------- ------------
608 Post 608 Info sys/chassis-1/blade-1 Invalid DIMM Configuration
Related Commands
DescriptionCommand
Shows server BIOS firmware information.show server bios
Cisco Firepower 4100/9300 FXOS Command Reference
316
S Commands
show post

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English