Cisco Firepower 4100 Command Reference

set adminstate
To take a network module offline, or to bring it back online, use the set adminstate command.
set adminstate {offline|online}
Syntax Description
Takes the module offline.offline
Brings the module online.online
Command Modes
Card mode
Command History
ModificationRelease
Command added to card (/fabric-interconnect/card) mode.2.3(1)
Usage Guidelines
Taking a module offline and online is used, for example, when performing module online insertion and removal
(OIR).
Example
This example shows how to take a module offline:
FP9300-A# scope fabric-interconnect a
FP9300-A /fabric-interconnect # scope card 2
FP9300-A /fabric-interconnect/card # show detail
Fabric Card:
Id: 2
Description: Firepower 4x40G QSFP NM
Number of Ports: 16
State: Online
Vendor: Cisco Systems, Inc.
Model: FPR-NM-4X40G
HW Revision: 0
Serial (SN): JAD191601DE
Perf: N/A
Admin State: Online
Power State: Online
Presence: Equipped
Thermal Status: N/A
Voltage Status: N/A
FP9300-A /fabric-interconnect/card # set adminstate offline
FP9300-A /fabric-interconnect/card* # commit-buffer
FP9300-A /fabric-interconnect/card #
Related Commands
DescriptionCommand
Verifies the existence of a slot that was recently commissioned. In fabric
interconnect mode, confirms that an existing module was replaced with one
with a different product ID (PID).
aknowledge slot
Cisco Firepower 4100/9300 FXOS Command Reference
165
S Commands
set adminstate

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English