Cisco Firepower 4100 Command Reference

set session-timeout
To set the idle session timeout for Web, SSH, and Telnet sessions, use the set session-timeout command.
set session-timeout seconds
Syntax Description
Idle session timeout for Web, SSH, and Telnet sessions; value can be 0 to 3600
seconds.
seconds
Command Modes
Default authentication mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this command to specify the idle session timeout for Web, SSH, and Telnet sessions.
Example
This example shows how to enter default authentication mode and then set the idle session timeout
to four minutes:
FP9300-A# scope security
FP9300-A /security # scope default-auth
FP9300-A /security/default-auth # set session-timeout 240
FP9300-A /security/default-auth* # commit-buffer
FP9300-A /security/default-auth #
Related Commands
DescriptionCommand
Sets the Web session refresh period.set refresh-period
Displays the current session and absolute session timeout settings.show detail
Cisco Firepower 4100/9300 FXOS Command Reference
224
S Commands
set session-timeout

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English