Cisco Firepower 4100 Command Reference

show server actual-boot-order
To display the server boot order actually used by the BIOS when the server last booted, use the show server
actual-boot-order command.
show server actual-boot-order [server_id|uuid dynamic_uuid]
Syntax Description
(Optional) Displays the actual boot order for a specific server, expressed as
chassis-number/server-number (rack ID is not a valid option).
server_id
(Optional) Displays the actual boot order for a server specified using its dynamic
universally unique identifier (UUID); specifed in the form
NNNNNNNN-NNNN-NNNN-NNNN-NNNNNNNNNNNN.
uuid dynamic_uuid
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
By default, this command displays actual boot order information for all servers.
Example
This example shows how to display the actual boot order of all servers:
firepower# show server actual-boot-order
Server 1/1:
Last Update: 2017-07-19T17:43:14.982
LocalStorageAny
(1) Not found. Please verify presence of device and p
resence of UEFI loader on device
Server 1/2:
Last Update: 2017-07-19T17:43:14.980
LocalStorageAny
(1) Not found. Please verify presence of device and p
resence of UEFI loader on device
firepower#
Related Commands
DescriptionCommand
Shows server boot order.show server boot-order
Cisco Firepower 4100/9300 FXOS Command Reference
326
S Commands
show server actual-boot-order

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English