Cisco Firepower 4100 Command Reference

clear sel
To clear the system event log (SEL) for a server, use the clear sel command.
clear sel {id|chassis_id/blade_id}
Syntax Description
(Optional) The server ID. The 9300 devices have a maximum of 3 servers.
id
(Optional) The chassis number and blade number in n/n format.
The chassis ID number is always 1.
Note
chassis_id/blade_id
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.4(1)
Usage Guidelines
Use this command to clear the system event log (SEL) for a server.
In the command mode for a specific server (/chassis/server), you can run this command without specifying a
server.
Example
This example shows how to clear system event logs for server 1 in chassis 1 while in organization
mode.
FP9300-A # scope org Test
FP9300-A /org # clear sel 1/1
FP9300-A /org* # commit-buffer
FP9300-A /org #
Related Commands
DescriptionCommand
Backs up the system event log (SEL).backup sel
Cisco Firepower 4100/9300 FXOS Command Reference
35
A – R Commands
clear sel

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English