Cisco Firepower 4100 Command Reference

show fips-mode
To display current FIPS (Federal Information Processing Standard) mode status information, use the show
fips-mode command.
show fips-mode
Syntax Description
This command has no arguments or keywords.
Command Modes
Security mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Enabling certification compliance on a Firepower 4100/9300 chassis does not automatically propagate
compliance to any of its attached logical devices.
Example
This example shows how to enter security mode and display current FIPS mode status information:
FP9300-A # scope security
FP9300-A /security # show fips-mode
FIPS Mode Admin State: Disabled
FIPS Mode Operational State: Disabled
FP9300-A /security #
Related Commands
DescriptionCommand
Disables FIPS mode.disable fips-mode
Enables FIPS mode.enable fips-mode
Cisco Firepower 4100/9300 FXOS Command Reference
270
S Commands
show fips-mode

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English