Cisco Firepower 4100 Command Reference

shutdown
To shutdown the device, use the shutdown command.
shutdown [no-prompt|reason]
Syntax Description
(Optional) Use this keyword to initiate shutdown immediately. Otherwise, a
commit-buffer is required to initiate shutdown.
no-prompt
(Optional) A text string to be appended to the shutdown log; can be up to 510
characters.
reason
Command Modes
Chassis mode
Local management mode: obsolete
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
We recommend backing up the system configuration before shutting down.
This command is obsolete in local management mode; use shutdown in chassis mode.
Example
This example shows how to enter chassis mode and shut the system down:
FP9300-A # scope chassis 1
FP9300-A /chassis # shutdown
This command will shutdown the chassis when committed
FP9300-A /chassis* # commit-buffer
Starting chassis shutdown. Monitor progress with the command "show fsm status"
System is safe to power off after "System halted." message is seen
FP9300-A /chassis #
Broadcast message from root@DOC-FP9300-A (Fri Apr 13 16:27:04 2018):
All shells being terminated due to system /sbin/shutdown
Related Commands
DescriptionCommand
Restarts the chassis or fabric-interconnect.reboot
Cisco Firepower 4100/9300 FXOS Command Reference
376
S Commands
shutdown

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English