Cisco Firepower 4100 Command Reference

scope server
To enter server mode, use the scope server command.
scope server {id|dynamic_uuid|chassis_id/blade_id}
Syntax Description
The server ID; an integer between 1 and 255.
id
The server’s dynamic universally unique ID (UUID).
dynamic_uid
The server specified using chassis and blade IDs; must be entered in n/n format.
The chassis ID is always 1.
Note
chassis_id/blade_id
Command Modes
EXEC mode
Command History
ModificationRelease
Command added.1.1(1)
Example
This example shows how to enter server mode:
FP9300-A# scope server 1/1
FP9300-A /chassis/server #
Related Commands
DescriptionCommand
Shows information about the network adapters in a server.show server adapter
Shows identity information about a server.show server identity
Cisco Firepower 4100/9300 FXOS Command Reference
151
S Commands
scope server

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English