Cisco Firepower 4100 Command Reference

enable
To enable an existing application instance, use the enable command.
Syntax Description
This command has no arguments or keywords.
Command Modes
Application instance (/ssa/slot/app-instance) mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this command to re-enable an application instance that was previously disabled.
Example
This example shows how to display current application instances, including their status, then enter
application instance mode and enable a disabled application:
FP9300-A # scope ssa
FP9300-A /ssa # scope slot 2
FP9300-A /ssa/slot # show app-instance
Application Instance:
App Name Identifier Admin State Oper State Running Version Startup Version
Deploy Type Profile Name Cluster State Cluster Role
---------- ---------- ----------- ---------------- --------------- ---------------
----------- ------------ --------------- ------------
ftd1 IFT-63 Enabled Online 6.3.0.12 6.3.0.12
Native In Cluster Slave
Application Instance:
App Name Identifier Admin State Oper State Running Version Startup Version
Deploy Type Profile Name Cluster State Cluster Role
---------- ---------- ----------- ---------------- --------------- ---------------
----------- ------------ --------------- ------------
ftd2 FTD-2 Disabled Online 6.3.0.12 6.3.0.12
Container bronze Not Applicable None
FP9300-A /ssa/slot # scope app-instance ftd2 FTD-2
FP9300-A /ssa/slot/app-instance # enable
FP9300-A /ssa/slot/app-instance* # commit-buffer
FP9300-A /ssa/slot/app-instance #
Related Commands
DescriptionCommand
Disables an existing application instance.disable
Enters application mode for a specific application instance.scope app-instance
Cisco Firepower 4100/9300 FXOS Command Reference
94
A – R Commands
enable

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English