show (app-instance)
To display current application information, use the show command in app-instance mode.
show [app-attri|detail|event|expand|fault|fsm|heartbeat|hotfix|resource]
Syntax Description
(Optional) Displays current application attributes.app-attri
(Optional) Displays detailed information for the current application instance.
This keyword is also available with many of the other command options to
display detailed information about the specified option.
detail
(Optional) Displays event management information for the application.event
(Optional) Displays expanded information for the current application instance.
This keyword is also available with many of the other command options to
display expanded information about the specified option.
expand
(Optional) Displays information about faults that have occurred in this
application instance. The following options are also available:
• fault_ID—Shows information for the specified fault.
• cause—Shows information for only the specified cause type.
• detail—Shows detailed fault information.
• severity—Shows information for only the specified severity level.
• suppressed—Lists suppressed faults. The cause, detail and severity
keywords are available with this option.
fault
(Optional) Displays finite state machine information the current application,
according to the specified keyword:
• status—Displays FSM status information.
• task—Displays FSM task information.
fsm {status|task}
(Optional) Displays information about the last-received heartbeat.heartbeat
(Optional) Displays information about applied hotfixes. The following options
are also available with this keyword: detail, expand, and version which you
can use to display information for a specific hotfix.
hotfix
(Optional) Displays information about current resource allocations.resource
Command Modes
Application instance (/ssa/slot/app-instance) mode
Cisco Firepower 4100/9300 FXOS Command Reference
237
S Commands
show (app-instance)
To Next Page
Loading...
Need help?
General