show interface brief (connect fxos)
To view or save a reduced set of interface status and other other information, use the show interface brief
command.
show interface brief
Syntax Description
This command has no arguments or keywords.
Command Modes
connect fxos
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
This command is a subcommand of the show interface command in the connect fxos shell.
Example
This example shows how to display a brief set of interface-related information:
firepower # connect fxos
firepower(fxos)# show interface brief
--------------------------------------------------------------------------------
Ethernet VLAN Type Mode Status Reason Speed Port
Interface Ch #
--------------------------------------------------------------------------------
Eth1/1 1 eth 1qtunl up none 1000(D) 48
Eth1/2 1 eth 1qtunl up none 1000(D) --
Eth1/3 1 eth 1qtunl down suspended(no LACP PDU) 1000(D) 1
Eth1/4 1 eth 1qtunl up none 1000(D) --
Eth1/5 1 eth 1qtunl up none 1000(D) --
Eth1/6 1 eth 1qtunl up none 1000(D) 2
Eth1/7 1 eth 1qtunl up none 1000(D) --
Eth1/8 1 eth 1qtunl down SFP not inserted 10G(D) --
Eth1/9 1 eth vntag up none 40G(D) --
Eth1/10 1 eth vntag up none 40G(D) --
Eth1/11 1 eth vntag up none 40G(D) --
Eth1/12 1 eth vntag up none 40G(D) --
Eth1/13 1 eth access down Administratively down 40G(D) --
Eth1/14 1 eth access down Administratively down 40G(D) --
Eth1/15 1 eth access down Administratively down 1000(D) --
Eth1/16 1 eth access down Administratively down 1000(D) --
Eth2/1 1 eth 1qtunl down SFP not inserted 10G(D) --
Eth2/2 1 eth 1qtunl down SFP not inserted 10G(D) --
Eth2/3 1 eth 1qtunl down SFP not inserted 1000(D) --
Eth2/4 1 eth 1qtunl down SFP not inserted 1000(D) --
Eth2/5 1 eth 1qtunl down SFP not inserted 10G(D) --
Eth2/6 1 eth 1qtunl down SFP not inserted 10G(D) --
Eth2/7 1 eth 1qtunl down SFP not inserted 10G(D) --
Eth2/8 1 eth 1qtunl down SFP not inserted 10G(D) --
--------------------------------------------------------------------------------
Port-channel VLAN Type Mode Status Reason Speed Protocol
Cisco Firepower 4100/9300 FXOS Command Reference
280
S Commands
show interface brief (connect fxos)