Cisco Firepower 4100 Command Reference

show mgmt-port
To view status information for the device management port, use the show mgmt-port command.
(local-mgmt)# show mgmt-port
Syntax Description
This command has no arguments or keywords.
Command Modes
connect local-mgmt
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this command to view information about configuration and status of the device management interface.
Example
This example shows how to display management port information:
firepower # connect local-mgmt
firepower(local-mgmt)# show mgmt-port
eth0 Link encap:Ethernet HWaddr b0:aa:77:2f:f0:a9
inet addr:10.89.5.14 Bcast:10.89.5.63 Mask:255.255.255.192
inet6 addr: fe80::b2aa:77ff:fe2f:f0a9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:174151 errors:0 dropped:0 overruns:0 frame:0
TX packets:101268 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:15273492 (14.5 MiB) TX bytes:80246582 (76.5 MiB)
firepower(local-mgmt)#
Related Commands
DescriptionCommand
Shows all open network ports.show open-network-ports
Cisco Firepower 4100/9300 FXOS Command Reference
308
S Commands
show mgmt-port

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English