Cisco Firepower 4100 Command Reference

commit-buffer
To save or verify configuration changes, use the commit-buffer command.
commit-buffer [verify-only]
Syntax Description
(Optional) Verifies/validates buffer contents only; the contents are not
committed.
verify-only
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this command to execute or verify all pending configuration changes. While any configuration changes
are pending, an asterisk (*) appears before the command prompt. When you enter the commit-buffer command,
the pending commands are committed and the asterisk disappears.
Example
This example shows how to save configuration changes:
FP9300-A# create org 3
FP9300-A /org* # commit-buffer
FP9300-A /org #
Related Commands
DescriptionCommand
Cancels and discards all uncommitted configuration changes.discard-buffer
Shows all pending configuration changes.show configuration
pending
Cisco Firepower 4100/9300 FXOS Command Reference
36
A – R Commands
commit-buffer

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English