Cisco Firepower 4100 Command Reference

set (certreq)
To specify parameters for a keyring certificate request, use the set command in certificate request mode.
set {country|dns|e-mail|fi-a-ip|fi-a-ipv6|fi-b-ip|fi-b-ipv6|ip|ipv6|locality|org-name|org-unit-name|
password|state|subject-name}
Syntax Description
(Optional) Specify a two-letter country code for the request; letters must be
capitalized.
country
(Optional) Specify the domain name assigned to the network; common to all
host names. This is an alternative to subject-name.
dns
(Optional) Specify the email address associated with the request.
e-mail
(Optional) If using an IPv4 address for the device domain, specify the IPv4
address of fabric-interconnect A.
fi-a-ip
(Optional) If using an IPv6 address for the device domain, specify the IPv6
address of fabric-interconnect A.
fi-a-ipv6
Not used; there is no fabric interconnect B.
fi-b-ip
Not used; there is no fabric interconnect B.
fi-b-ipv6
(Optional) Specify the IPv4 address of the device domain.
ip
(Optional) Specify the IPv6 address of the device domain.
ipv6
(Optional) Specify the city or town in which the company requesting the
certificate is headquartered.
Enter up to 64 characters. You can use any letters, numbers, or spaces, as well
as the following special characters: , (comma), . (period), @ (at sign), ^ (carat),
( (open parenthesis), ) (close parenthesis), - (dash), _ (underscore), + (plus
sign), : (colon), / (forward slash).
locality
(Optional) Specify the name of the organization requesting the certificate.
Enter up to 64 characters. You can use any letters, numbers, or spaces, as well
as the following special characters: , (comma), . (period), @ (at sign), ^ (carat),
( (open parenthesis), ) (close parenthesis), - (dash), _ (underscore), + (plus
sign), : (colon), / (forward slash).
org-name
(Optional) Specify the name of the unit within the organization.
Enter up to 64 characters. You can use any letters, numbers, or spaces, as well
as the following special characters: , (comma), . (period), @ (at sign), ^ (carat),
( (open parenthesis), ) (close parenthesis), - (dash), _ (underscore), + (plus
sign), : (colon), / (forward slash).
org-unit-name
(Optional) You are asked to enter and then confirm a password for the request.
password
Cisco Firepower 4100/9300 FXOS Command Reference
159
S Commands
set (certreq)

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English