Cisco Firepower 4100 Command Reference

set con-absolute-session-timeout
To set the serial console absolute session timeout, use the set con-absolute-session-timeout command.
set con-absolute-session-timeout seconds
Syntax Description
Serial console absolute session timeout; value can be 0 to 3600 seconds. To
disable this timeout, set the value to 0.
seconds
Command Modes
Default authentication mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
You can separately configure the absolute session timeout for serial console sessions. This means you can
disable the serial console absolute session timeout for debugging while maintaining the absolute timeout for
other forms of access.
Example
This example shows how to enter default authentication mode and then set the serial console absolute
timeout to four minutes:
FP9300-A# scope security
FP9300-A /security # scope default-auth
FP9300-A /security/default-auth # set con-absolute-session-timeout 240
FP9300-A /security/default-auth* # commit-buffer
FP9300-A /security/default-auth #
Related Commands
DescriptionCommand
Sets the Web session refresh period.set refresh-period
Displays the current session and absolute session timeout settings.show detail
Cisco Firepower 4100/9300 FXOS Command Reference
177
S Commands
set con-absolute-session-timeout

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English