Cisco Firepower 4100 Command Reference

set con-session-timeout
To set the serial console idle session timeout, use the set con-session-timeout command.
set con-session-timeout seconds
Syntax Description
Serial console idle session timeout; value can be 0 to 3600 seconds. To disable
this timeout, set the value to 0.
seconds
Command Modes
Default authentication mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this command to specify the idle session timeout for serial console sessions.
Example
This example shows how to enter default authentication mode and then set the serial console idle
timeout to four minutes:
FP9300-A# scope security
FP9300-A /security # scope default-auth
FP9300-A /security/default-auth # set con-session-timeout 240
FP9300-A /security/default-auth* # commit-buffer
FP9300-A /security/default-auth #
Related Commands
DescriptionCommand
Sets the Web session refresh period.set refresh-period
Displays the current session and absolute session timeout settings.show detail
Cisco Firepower 4100/9300 FXOS Command Reference
178
S Commands
set con-session-timeout

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English