Cisco Firepower 4100 Command Reference

discard-buffer
To cancel pending configuration changes, use the discard-buffer command.
discard-buffer
Syntax Description
This command has no arguments or keywords.
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this command to cancel and discard all uncommitted configuration changes. While any configuration
commands are pending, an asterisk (*) appears before the command prompt. When you enter the discard-buffer
command, the commands are discarded and the asterisk disappears.
Example
This example shows how to discard pending configuration changes:
FP9300-1# scope chassis 1
FP9300-1 /chassis # enable locator-led
FP9300-1 /chassis* # show configuration pending
scope chassis 1
+ enable locator-led
exit
FP9300-1 /chassis* # discard-buffer
FP9300-1 /chassis #
Related Commands
DescriptionCommand
Saves or verifies configuration changes.commit-buffer
Shows uncommitted configuration changes.show configuration
pending
Cisco Firepower 4100/9300 FXOS Command Reference
91
A – R Commands
discard-buffer

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English