Cisco Firepower 4100 Command Reference

disable cc-mode
To disable Common Criteria mode, use the disable cc-mode command.
disable cc-mode
Syntax Description
This command has no arguments or keywords.
Command Modes
Security (/security) mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
A reboot of the system will be required after this command is committed.
Example
This example shows how to enter security mode and disable Common Criteria mode:
FP9300-A # scope security
FP9300-A /security # disable cc-mode
Warning: A reboot of the system is required in order for the system to be
operating in a non-CC approved mode.
FP9300-A /security* #
Related Commands
DescriptionCommand
Enables Common Criteria mode.enable cc-mode
Shows current Common Criteria mode admin and operational states.show cc-mode
Cisco Firepower 4100/9300 FXOS Command Reference
88
A – R Commands
disable cc-mode

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English