Delta DVP-ES3 Series Hardware Manual

DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
1-2
_1
1.1 Overview
This manual introduces the block-type high-end applicational DVP-ES3/EX3 Series PLC CPU and slim-type
high-end applicational DVP-SV3/SX3 Series PLC CPU; their functions, electrical specifications, hardware
configuration, appearances, dimensions, as well as wiring and so forth are presented here. Refer to DVP
Series Module Manual for more information on the extension I/O modules of DVP-ES3/EX3 and DVP-SV3/SX3
Series PLC CPU.
Related Manuals
The related manuals for DVP-ES3/EX3/SV3/SX3 Series programmable logic controllers are listed below.
 DVP-ES3/EX3/SV3/SX3 Series Programming Manual
This introduces programming for the DVP-ES3/EX3/SV3/SX3 Series programmable logic controllers, basic
instructions, and applied instructions.
For DVP-ES2/SX2 Series PLC, refer to DVP-ES2-/EX2-SS2/SA2/SX2/SE & TP Operation Manual –
Programming; for DVP-SV2 Series PLC, refer to DVP-PLC Operation Manual – Programming.
 ISPSoft User Manual / DIADesigner Software User Manual.
This introduces the use of the ISPSoft software / DIADesigner Software, programming language (Ladder,
SFC, FBD, and ST), POUs, and tasks.
DVP-ES3 Series PLC can only use ISPSoft / DIADesigner for programming, NOT WPLSoft.
DVP-ES300TEC/EX3/SV3/SX3 can only use DIADesigner for programming, Neither ISPSoft nor WPLSoft.
 DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
This introduces electrical specifications, dimensions, CPU functions, devices, extension I/O module
placement, troubleshooting, and so forth.
 DVP Series Module Manual
This introduces the extension modules, e.g. network modules, analog modules and temperature
measurement modules.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English