DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
9-86
Item Description
CPU Run LED
LED of CPU running status; read only
Green light: RUN
LED Not Lit: STOP
CPU Error LED LED of CPU Error; read only
CPU Error code Error codes of CPU module; read only
“Run” / “Stop”
Click “RUN” to set the running status to RUN
Click “Stop” to set the running status to STOP
If the authority level for the logged in user is WRITE/READ or
READ, this column is read only.
9.11.6 Configurations
9.11.6.1 Save Configuration Page
You can save the configurations and download the parameters to your device here.
Item Description
“Save” Download the saved parameters to the device.
PLC Status
LED of PLC r
unning status; read only
Green light: RUN
LED Not Lit: STOP
“Run” / “Stop”
Click “RUN” to set the running status to RUN
Click “Stop” to set the running status to STOP
Note: The data monitor table must be downloaded to the device. If not, once you log out, close the page or restart the
PLC, all the temporary saved parameters will be cleared.
To Next Page
Loading...
Need help?
General
