To Next Page

To Previous Page

Chapter 6 Writing a Program

6-13

Additional remark

After you click a network and press Enter on the keyboard, you can edit a box. Press Enter on the keyboard to

edit the next box in the network. Press Tab on the keyboard to select the next network. Use the keyboard to

edit boxes. After you finish the editing, press Enter on the keyboard to jump to the next box. Press Esc on the

keyboard to exit editing.

If you have declared symbols, the device is editable, clear the value in the device and then you can see the

available symbols for you to assign to the object. Select a symbol with the mouse or the up/down key on the

keyboard. Refer to Chapter 6 in the ISPSoft User Manual for more information about symbols.

6.5.3

Basic Editing ─ Inserting a Network and Typing an Instruction

Click on the toolbar to select a network. Click on the toolbar to place another network above the

selected network. In this example, Network 2 is under Network 1.

Delta DVP-ES3 Series Hardware Manual

Other manuals for Delta DVP-ES3 Series