Delta DVP-ES3 Series Hardware Manual

DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
6-24
_6
Write the program shown below. In ISPSoft, K precedes a decimal value and H precedes a hexadecimal
value. To type a decimal value in ISPSoft, type it directly. To type a hexadecimal value in ISPSoft, type “16#”
and the hexadecimal value; e.g. 16#7FFF. In ISPSoft, 8# precedes an octal value, and 2# precedes a binary
value.
6.5.9 Writing a Program
The previous sections introduced creating a traditional ladder diagram in ISPSoft. Write the program shown
below. Because the program is not yet compiled for the PLC, the mother line at the left side of the ladder
diagram is colored red while you write the program. The following sections show how to compile and
download the compiled program for testing.
*1. The program above saves in the folder …\ISPSoft x.xx\Project\Example\Gluing_System_C.
*2. Refer to Chapter 10 in the ISPSoft User Manual for more information about creating a ladder diagram.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English