Delta DVP-ES3 Series Hardware Manual

Chapter 6 Writing a Program
6-5
6_
6.3 Creating a Project
This section will use ISPSoft software as an example for explanation. Refer to section 4.2.2.3 of the
DIADesigner User Manual for information related to DIADesigner software.
After you start ISPSoft, on the
File
menu, point to
New
, and then click
New
to create a new project. You can
also create a new project by clicking on the toolbar after you start ISPSoft.
In the
Create a New Project
dialog box, type a project name in the
Project Name
box and a path in the
Drive/Path
box, select a PLC in the
PLC Type
drop-down list box, and then click
OK
. The PLC in this
example is the DVP32ES3.
After you create the project, a project management area appears at the left side of the main screen. The
relation between the items listed in the project management area is represented by a hierarchical tree
structure. If the project management area does not appear, on the
View
menu, click
Workspace
, or click
on the toolbar.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English