Delta DVP-ES3 Series Hardware Manual

DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
8-42
_8
8.4.2.3 Ethernet Port Basic Setting
Click
Ethernet Port Basic Setting
to see the setting page. Set the communication parameters for the Ethernet port in
the CPU module on this page.
Select
Static
in the
Mode
list to specify an IP address. Select
Dynamic
or
BOOTP
in the
Mode
list to assign an IP
address from a DHCP/BOOTP server.
8.4.2.4 Ethernet Port Advanced Setting
Click
Ethernet Port Advanced Setting
to see the setting page. There are setups for
IP Filter, NTP, Email, Socket,
and
RTU-EN01 mapping
.
IP Filter
Devices whose IP addresses are listed in the table are allowed to communicate with the CPU module; the CPU
module discards data packets sent from devices whose IP addresses are not in the table. Devices on a network are
filtered. This setting ensures that objects communicating with the CPU module are known devices. You can set up to 8
address ranges for allowed devices.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English