Delta DVP-ES3 Series Hardware Manual

Chapter 9 Ethernet Specification and Operation
9-5
9_
9.1.3 Ethernet Features
9.1.3.1 Delta EIP Architecture
This typical Delta EIP architecture includes an EIP Scanner and Adapters; data mapping is achieved between devices
through an I/O connection and explicit messaging. The DVP-ES3/SV3/SX3 Series supports single port Ethernet; thus you
can install and configure devices with embedded switch technology over EtherNet/IP. DVP-EX3 Series supports dual port
and linear topology.
9.1.3.2 EIP Features
 Flexibility
- Flexible topology: EIP devices may include single port Ethernet as well as dual port Ethernet, and provide
applicable networks such as linear topology, ring topology and ring topology for faster expansion and easier
management.
- EtherNet/IP works on a TCP/UDP/IP based Ethernet network, uses most widely deployed collections of Ethernet
standards, and supports Wi-fi connection. Even personnel with no IT background can build the network easily.
- Applicable networks include linear topology, ring topology, star topology, Ethernet, EtherNet/IP, one or more
LANs, etc. You can set configuration through USB or an interface.
 Simplicity
- With a connector: Delta provides a full range of products, including human machine interfaces (HMI),
programmable logic controllers (PLC), and inverter drives for application in an industrial operation. You can build
a network simply through an RJ-45 connector, saving costs on cables and other connecting tools.
- Single network: in place of the 3-tier industrial architecture, single network architecture provides 100MB/bits
high-speed cyclical and non-cyclical data mapping functions, ensuring complete network diagnosis and
effectively shortening debugging time.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English