Delta DVP-ES3 Series Hardware Manual

DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
7-2
_7
7.1 Overview of Memory Cards
You can use either ISPSoft or DIADesigner to edit DVP-ES3. But only use DIADesigner to edit
DVP-ES300TEC/EX3/SV3/SX3.
The DVP-ES3/EX3/SV3/SX3 CPU modules support standard MicroSD cards that meet the specifications in this
chapter. This chapter describes the specifications and usage for the MicroSD cards supported by the
DVP-ES3/EX3/SV3/SX3 CPU modules.
7.1.1 Appearances of Memory Cards
SD cards are classified into three types according to size: SD cards, MiniSD cards, and MicroSD cards.
DVP-ES3/EX3/SV3/SX3 CPU modules support MicroSD cards.
7.1.2 Memory Card Specifications
SD cards are also classified into three types according to capacity: SD cards, SDHC cards, and SDXC cards.
The DVP-ES3/EX3/SV3/SX3 currently only supports a maximum of 32GB in FAT32 format. SD card families
are shown in the table below. The Micro SDHC in the SDHC column indicates the specifications supported by
the DVP-ES3/EX3/SV3/SX3. Be sure to purchase products that meet these specifications.
 SD card families
Type
SD SDHC SDXC
Capacity 32 MB~2 GB 4 GB~32 GB 32 GB~2 TB
File
system
FAT16/FAT32 FAT32 exFAT (FAT64)
Size SD SDHC SDHC
Mini
SDHC
Micro
SDHC
SDXC Micro SDXC
Speed
class
rating
N/A
CLASS 2 (Min. 2 MB/Sec.)
CLASS 4 (Min. 4 MB/Sec.)
CLASS 6 (Min. 6 MB/Sec.)
CLASS 10 (Min. 10 MB/Sec.)
CLASS 2 (Min. 2 MB/Sec.)
CLASS 4 (Min. 4 MB/Sec.)
CLASS 6 (Min. 6 MB/Sec.)
CLASS 10 (Min. 10 MB/Sec.)

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English