DVP-ES3/EX3/SV3/SX3 Series Hardware and Operation Manual
11-6
Information -> Device information: You can find basic product information in this section. This section is not
password-protected; you can open this page without logging in.
Network configuration -> Account management: You can block unauthorized remote access to protect data
and product security by setting up the username and password in this section. After configuration is
complete, click “Apply” and “Save configuration”.
Network configuration -> Firmware update: Upload the firmware file through the webpage to update
firmware of the EtherCAT port (function card).
Note: It is recommended to set access permissions on the account management page to avoid
unauthorized remote firmware updates.
Save config -> Save configuration: After any setting is done, you need to go to this page to save the
configurations for the changes to take effect.
11.8 Network Security
To enhance security and performance of the system, it is suggested to use closed network or LAN with firewall protection
to prevent cyber-attacks.