9. Chapter 7: Added a new size SDHC for SDHC typed
memory card in Section 7.1.2.
10. Chapter 9: Updated specification in Section 9.3.
Added explanations on EIP Builder operation in
Section 9.3.7 to 9.4.7. Deleted the software images
from the 3
rd
party. Updated the Delta EIP Product List
in Section 9.9. Added a new Section “Network
Security” in Section 9.10.
11. Chapter 10: Added an explanation on output mapping
area for ES3 Series PLC CPU, when it acts as a
Master in Section 10.1.2. Added a new Section
“Refreshing Mechanism in the Input/output Mapping
Area” in Section 10.1.3. Corrected the typo SR289 to
SR829 in Section 10.5.1.
12. Chapter 11: Updated the procedure in Section 11.1.1.
Added a new module, positioning module, and updated
the contents in Communication Service in Section
11.1.2. Added Execution Timing of Interrupts in
Section 11.1.3. Updated contents in Operating Modes
in Section 11.2.1.
13. Chapter 12: Updated Troubleshooting SOP in Section
12.1.3. Updated the steps to do when encountering a
program syntax error in Section 12.1.4. Added new
error codes 16#19B0~16#19FC and updated error
codes 16#2001~16#2027 in Section 12.2. Added a new
Section “Troubleshooting for Positioning Modules
(PU)” in Section 12.3.2. Added new error codes
16#19B0~16#19FC and 16#C000~16#CFFF in Section
12.4.
14. Appendix A: Added a new Section “Notes on Utilizing
USB Communication” in Section A.3.
15. Appendix C: Updated the contents of Connecting a
power cable and a ground in Section C1.2.
16. Appendix D: Updated the chapter numbers.
3rd
1. Chapter 1: Updated the overview contents.
2. Chapter 2: Added the specification of maximum inrush
current in section 2.2, updated hardware resolution in
section 2.5.1, updated the supply voltage, input
current, maximum input frequency, and resistance of
the maximum load in section 2.6.1.
3. Chapter 4: Added a warning sign in section 4.10.
4. Updated the contents in CR#43 in sections from
5.3.1to 5.3.5. Added a note for PID Control Registers
in section 5.3.4.
5. Chapter 8: Added more descriptions for the selection,
2022/03/11