SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 103
Confidential
3.4.2.17 FRONT LEFT LOWER COVER
1. Remove the UPPER LEFT COVER. (p100)
2. Remove the UPPER SUPPORT R COVER. (p94)
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the FRONT COVER. (p86)
6. Remove the LEFT UPPER COVER & LEFT ROLL COVER. (p101)
7. Remove the REAR LEFT LOWER COVER. (p104)
8. Remove the LEFT LOWER COVER. (p98)
9. Remove the four screws, and remove the FRONT LEFT LOWER COVER.
A) Silver M3x8 S-tite screw with built-in washer: 4 pcs
Figure 3-30. Removing the FRONT LEFT LOWER COVER
Pay attention to the positioning points (See below figure).
FRONT LEFT
LOWER COVER
Positioning points
Positioning points
A
A
Left side
A
A
Front side
FRONT LEFT
LOWER COVER