Epson SC-T7000 series User Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
ADJUSTMENT Counter Reset 231
Confidential
4.7 Counter Reset
Whenever the parts/units which have life counter are replaced, the corresponding life
counter must be reset. This is important to replace those parts/units at the correct
timing.
EXECUTION MODE
Normal mode
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and click [FLAG CHANGE & COUNTER RESET]
from the main menu.
3. Choose one of the counter reset menus to be reset.
4. Click [Run] to reset the counter.
5. Click [Finish].
6. Restart the printer.
7. With NVRAM Viewer, verify that the counter has been reset to "0".
8. Turn the printer OFF.
Figure 4-11. [FLAG CHANGE & COUNTER RESET] Screen
C H E C K
P O I N T
The history of the Counter Clear can be checked per counter on the
NVRAM Viewer (P. 222).
Table 4-10. Clear Counter Menu List
Class Item Clear Menu Name
Main unit
counter (Motor)
CR MOTOR CR Motor Counter
Main unit
counter (Motor)
PF MOTOR PF Motor Counter
APG Motor APG motor counter reset
ATC MOTOR ATC Motor Counter Reset
Cutter motor Cutter motor counter reset
Main unit
counter (Ink
system)
PRINT HEAD Print Head Counter
DAMPER KIT Damper Kit Counter
PUMP CAP UNIT Pump Cap Unit Counter
IC HOLDER Ink Holder Counter
INK TUBE Ink tube counter
Table 4-10. Clear Counter Menu List
Class Item Clear Menu Name

Epson SC-T7000 series Specifications

General

Brand	Epson
Model	SC-T7000 series
Category	Printer
Language	English