Epson SC-T7000 series User Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 89
Confidential
3.4.2.5 IH COVER
1. Remove the UPPER LEFT COVER. (p100)
2. Remove the UPPER SUPPORT R COVER. (p94)
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER. (p95)
6. Remove the FRONT COVER. (p86)
7. Remove the RIGHT LOWER COVER. (p96)
8. Release the cable from the four clamps.
9. Disconnect the cable from the relay connector (No.1), and release the cable of the
CARTRIDGE COVER SENSOR.
Figure 3-15. Releasing the Cable
10. Open the Cartridge Cover.
11. Remove the four screws that secure the IH COVER.
A) Silver M3x8 S-tite screw with built-in washer: 4 pcs
Figure 3-16. Removing the IH COVER
Relay Connector (No.1)
Clamps
Clamp
Cable of the
CARTRIDGE
COVER
SENSOR
IH COVER
A
A
A
A
Cartridge Cover

Epson SC-T7000 series Specifications

General

Brand	Epson
Model	SC-T7000 series
Category	Printer
Language	English