Epson SC-T7000 series User Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 146
Confidential
3.4.4.12 PG SENSOR
1. Perform the Tube inner pressure reduction. (p248)
2. Remove the UPPER LEFT COVER. (p100)
3. Remove the UPPER SUPPORT R COVER. (p94)
4. Remove the PANEL BOARD. (p120)
5. Remove the TOP COVER. (p85)
6. Remove the FRONT COVER. (p86)
7. Remove the LEFT UPPER COVER & LEFT ROLL COVER. (p101)
8. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER. (p95)
9. Unlock the CR UNIT. (p83)
10. Remove the CR COVER. (p122)
11. Remove the DAMPER KIT. (p123)
12. Remove the PRINT HEAD. (p126)
13. Remove the RIGHT LOWER COVER. (p96)
14. Remove the APG UNIT. (p144)
15. Remove the CR MOTOR. (p141)
16. Remove the CR SCALE. (p135)
17. Remove the CR UNIT. (p156)
18. Disengage the hooks, and remove the PG SENSOR.
Figure 3-93. Removing the PG SENSOR
19. Disconnect the Cable from the PG SENSOR.
Figure 3-94. Removing the Cable
PG SENSOR
Hook
PG SENSOR
Cable
Connector

Epson SC-T7000 series Specifications

General

Brand	Epson
Model	SC-T7000 series
Category	Printer
Language	English