Epson SC-T7000 series User Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 118
Confidential
3.4.3.6 PSH BOARD
1. Remove the UPPER LEFT COVER. (p100)
2. Remove the UPPER SUPPORT R COVER. (p94)
3. Remove the PANEL BOARD. (p120)
4. Remove the TOP COVER. (p85)
5. Remove the RIGHT UPPER COVER & RIGHT ROLL COVER. (p95)
6. Remove the REAR RIGHT LOWER COVER. (p99)
7. Loosen the screw that secures the HDD Fixing Plate.
A) Silver M3x8 S-tite screw with built-in washer: 1 pcs
8. Remove the two screws that secure the HDD Fixing Plate.
B) Silver M3x8 S-tite screw with built-in washer: 2 pcs
9. Disconnect the cables from the connector (CN1, CN5) of the MAIN-B BOARD,
and remove the HDD Fixing Plate.
Figure 3-48. Removing the HDD Fixing Plate
A D J U S T M E N T
R E Q U I R E D
When replacing/removing this part, refer to “4.1.2 Adjustment
Items and the Order by Repaired Part” (p199) and make sure to
perform the specified operations including required adjustment.
MAIN BOARD
MAIN-B BOARD
CN5
CN1
HDD Fixing Plate
A
B
B
HDD Fixing Plate

Epson SC-T7000 series Specifications

General

Brand	Epson
Model	SC-T7000 series
Category	Printer
Language	English