Epson SC-T7000 series User Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
ADJUSTMENT Ink Supply Related Checks and Adjustments 259
Confidential
4.12 Ink Supply Related Checks and Adjustments
4.12.1 Ink eject
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode. Turn the power ON while pressing
[Menu] + [Back] + [OK].
2. Remove all the ink cartridges.
3. Start the Service Program and select Ink eject.
4. Click [Run].
5. When finished, turn the printer OFF.
Figure 4-54. [Ink eject] Screen
C H E C K
P O I N T
Time required for ejecting ink (all rows): about 15 minutes
C A U T I O N
Running the Ink eject function one time may not be enough to
prevent ink from leaking when removing the ink tubes. Prepare
paper or cloth to wipe off spilled ink in advance or run the Ink eject
function twice in a row.

Epson SC-T7000 series Specifications

General

Brand	Epson
Model	SC-T7000 series
Category	Printer
Language	English