SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
ADJUSTMENT Overview 198
Confidential
4.1 Overview
This chapter describes the Service Program software utility and the adjustment
procedures required after repairing or replacing certain parts.
4.1.1 Precautions
Always observe the following cautions whenever making an adjustment on the printer.
C A U T I O N
Always refer to "4.1.2 Adjustment Items and the Order by
Repaired Part" (p.199) and make sure to perform all the
adjustments listed in the table in the given order.
Always read and follow the precautions given in each section
that explains each adjustment. Ignoring the precautions can
result in malfunction of the printer.
To Next Page
Loading...
Need help?
General