Honda TRX500FM Service Manual

CYLINDER HEADNALVE
Loosen the two cylinder bolts [11.
Se careful not to leI Loosen the cylinder head bolt and nuts [2] in a Jl ....... ::-l
the nuts and crisscross pattern in several sleps, and remove the bolt,
washers fal/lnto Iha nuts and washers.
crankcase.
Remove the cylinder head [3J. being careful nol to
damage the mating su rfaces.
Remove the gasket [1] and two dowel pins [2].
CYLINDER HEAD DISASSEMBLY
Remove the cylinder head (page 10-9 ).
To prevent loss of Remove the valve spring colters using the valve spring
/enslOfl, donal compressor 11].
compress the valve TOOL:
spnngs mote than
necessary. Valve spring compr e ssor 07757.0010000
Marl< an lhe pans
so they can be
placed back in their
origms/Iocations.
10-10
Remove the following:
- spring retainer [1]
- outer and inner valve springs 12J
- valve [3]
- stem
seal [4]
- spring seat
[5)
[2[
" \~
•
[4[

Honda TRX500FM Specifications

General

Brand	Honda
Model	TRX500FM
Category	Offroad Vehicle
Language	English