Honda TRX500FM Service Manual

REAR DRIVING MECHANISM
PINION
GEAR INSTALLATION
Blow compressed air through the breather hole [1] in ,-------- ..., .. ,- -.._
the gear case.
Drive the pinion gear assembly [I] into the gear case.
TOOLS:
(2] Driver
(3] Attachment , 42 x 47 mm
[4] Fork seal driver weig ht
07749-0010000
07746-0010300
07747-0010100
InstaU a new lock nul [I] and tighten it to the specified ~==== ~;II""IIIIIIIIIIIIIIIIII~ ~== ==~
torque. [2]
TOOL :
(2) Lock nut wrench , 30 x 64 mm 01916·MB00002
Referto "Service TORQUE: Actual : 98 N'm (10.0 kgf 'm , 72 IbHt)
fnformatJon"for Indicated: 89 N'm (9.1 kgf 'm, 66 1bHt)
torque wrench
reading information
(page 20-3).
Be careful not to Slake [I] the lock nut into the case groove.
damage the threads
arrha case.
20-20
[1[
,

Honda TRX500FM Specifications

General

Brand	Honda
Model	TRX500FM
Category	Offroad Vehicle
Language	English