Check the mounting rubbers [1], bushings
12]
and dust
seals for deterioration, wear or damage.
ENGINE INSTALLATION
Install the lower engine mounting bushings [1] into the
engine.
Install the dust seals
(2J
with the lip side [3) facing out.
ENGINE REMOVAUINSTALLATION
[2[
[1
)
(3)
(3)
Hold the engine
securely and
be
careful not
to
damage the frame
and engine.
P)
Place the engine
in
the frame from
the
left side and
~;:::7==
=:
:=~:=
==
:;;
____
iiiiiiii
~
support
it
with suitable wooden blocks.
Coat a new O-ring [1] with molybdenum disulfide
grease and install
it
into the output shaft [2] groove.
Apply molybdenum disulfide grease to the splines
of
the
universal joint [3}.
Carefully
move
the engine and engage the output shaft
with the
universal jOint.
15-9
To Next Page
Loading...
Need help?
General
