Honda TRX500FM Service Manual

FRONT WHEEUSUSPENSION/STEERING
Install the wheel hub 11) and hub nut [2].
Tighten the nut to the specified torque and further
lighten until its grooves align with the cotter pin hole.
TORQUE: 78 N'm (8.0 kgf'm , 58 IbHt )
Install
a new cotter pin [3].
111
Install the brake caliper [1] with new mounting bolls [2] ;======== ;,;;;;;;;;;;;,;;;;;;;;;;;;;;;;
and lighten them to Ihe specified torque.
TORQUE: 30 N'm (3.1 kgf -m , 22 Ibf · ft)
Install the outboard guard {3] and lighten the bolts [4].
Install the hose clamps (1] with new clamp bolts [2) and
tighten them to Ihe specified torque.
TORQUE: 12 N'm (1 .2 kgf -m , 9 IbUl)
Install the front wheel (page 16-13).
SUSPENSION ARM
REMOVAL
Remove the wheel hub and knuckle (page 16-16).
Remove the following :
- pivot nuts [1] and bolls [2]
-
lower arm [3]
~ 12J
16-23

Honda TRX500FM Specifications

General

Brand	Honda
Model	TRX500FM
Category	Offroad Vehicle
Language	English